How to Make a Miniature Victorian Toilet (2024)

Last week we shared a tutorial on how to make a little crate to store teeny, tiny toilet rolls and I promised I’d share how we made some of the other bits in the bathroom, like the miniature Victorian toilet.

If you’ve been following the blog for a while you’ll know how much we enjoy making things for our fairies and this small Victorian toilet is no exception. Isn’t it just the cutest? The lid even moves up or down. Our faeries are fussy 😉

It still needs fairy dust to flush though 😀 but hey we have a lot of that around here. And all in all, it probably costs less than $1 to make with things we already had at home.

Right, before we get to the tutorial, be sure to follow us on Facebook, Twitter, Pinterest, or Instagram. And don’t forget to subscribe so you’ll never miss a post!

What you need to make a miniature toilet

• Florist foam
• Ice cream sticks
• Wooden skewer
• Round tube
• Wood stain
• Sharp craft knife
• Thin wire
• Toothpick
• Balsa wood
• White craft paint

How to make a miniature Victorian toilet

This little toilet may look like a lot of work, but it’s pretty simple to recreate with a little bit of florist foam and a few ice cream sticks. Florist foam is surprisingly durable and so easy to shape with a craft knife.

But first things, first. Measure your doll, or fairy’s bottom, and find a container or something that’s roughly the same size. I used one of those tube-y things that effervescent tablets come in. Squish the container into the florist foam to create a bowl-shaped hole for the miniature Victorian toilet.

Use a sharp craft knife to cut the florist foam into a block shape for the bottom of the toilet seat portion and another rectangular shape for the cistern that goes on top. The florist foam forms the base structure for both the toilet seat and the cistern.

Eyeball how high the cistern should be above the toilet seat portion and trim a skewer to size. Measure the sides of your shapes and cut a whole bunch of ice cream sticks to fit.

Use the toilet block and the cistern florist foam shapes to cut pieces of balsa wood for the top and bottom of each.

Cut a hole in the center of one of the balsa wood pieces. This will go over the indentation you made earlier in the florist foam for the toilet bowl.

Sand any rough edges and check that it fits neatly over the bowl.

Cut a toilet lid shape from balsa wood and sand smooth.

Excuse the grimy fingernails. Making a miniature Victorian toilet is messy business 😀 Paint the inside of the toilet bowl white and stain the ice cream sticks and balsa wood pieces in your favorite stain. I used some of our Rusty Nail Muti.

Once the stain dries, glue the ice cream sticks and the balsa wood pieces you cut earlier onto the florist foam.

You can use any craft glue that dries clear. Keep the toilet lid to one side. We’ll get to that in a second.

Making a small hinge for the toilet lid

Now for the all-important part, making a teeny, tiny hinge that will allow the lid to flip up and down. This one had the hamster in my head doing double time 😀 The miniature Victorian toilet is only 13 cm tall from the bowl to the cistern. The toilet bowl is about 4 cm x 4 cm so there’s no way I could find a working hinge that small anywhere. But I do have toothpicks and lots of wire, which is all I needed to make one 😉

Place the toothpick on the flat portion on the toilet seat and cut to size.

Cut the thin wire into four 1″ pieces and bend them around the toothpick. Place two of the pieces of wire over the toothpick, squish the points together and push the points into the seat.

Place the other two pieces around the toothpick as shown below, squish their points together and then insert those points into the toilet seat.

I’m hoping the pictures explain it better than my words do. If you’re confused, please let me know. You can also look at the seat lifting thingamajig on a life-sized toilet. It should make it clearer (I hope 😉 )

To finish the miniature Victorian toilet off, insert the skewer you cut earlier into the toilet bottom and add the cistern on top. Make a small “pull-chain” by twisting up some wire and gluing it on to the cistern.

The other miniature bathroom accessories

No miniature bathroom would be complete without a few accessories, like that small ladder. So perfect for hanging towels and they’re on-trend right now too 😀 Just glue a few twigs together.

Another small twig can be used as a toilet paper holder. Can you see it glued to the wall?

A few more real miniature toilet paper rolls are stacked in a junk styled crate.

And we added one of our fairy leaf planters next to the toilet for a touch of greenery in the corner.

Now I just need to figure out how to make a Victorian bath to complete the picture 😉 Any ideas?

If you like the idea of making a miniature Victorian toilet, don’t forget to pin it for later.

Sharing is caring 🙂

Oh and if you’re looking for some of the things we used, we’ve got you coveredDisclosure: Clicking on the links below, means we may receive a commission from Amazon. But don’t worry it won’t come out of your pocket, and it helps us come up with more amazing craft ideas to share with you 😉

And if you prefer to buy rather than DIY

And as always, wishing you a wonderful, crafty week filled with lots of love. Thank you for popping in for a visit.